Welded steel bar diameter 4-14mm, which can be used to upgrade 0.5mm diameter. Consider transportation, welded wire length should not exceed 12m bridge grille formal manufacturers, the width should not exceed 3.4m. Welded steel mesh production direction (or longitudinal bars) spacing appropriate for 100,150,200mm, another direction reinforcement spacing is generally 100,150,200,300mm, sometimes up to 400mm. When the vertical and horizontal welded steel bars are single, thin steel nominal diameter shall be not less than thick reinforced 0.6 times the nominal diameter of the bridge steel wire mesh manufacturers, namely dmin≥0.6damx. Welded joints of shear force (in N) should not be less than 150 and coarse steel nominal cross-sectional area (in mm2) of the product. Static load test: According seedbed area bridge steel wire mesh manufacturers, per square meter 500N, to load 24 hours after unloading seedbed seedbed should not have significant deformation appearance. Anti-tipping seedbed: the table is bounded by the centerline of the bridge steel wire mesh, per square meter of 100N load is applied to one side, then turn the hand wheel so that the table were moved to two extreme positions, the table may not tipping . Bridge steel wire mesh manufacturer, bridge steel wire mesh, metal mesh Asahi Connaught (View) supplied by Asahi Connaught Anping Wire Mesh Products Co., Ltd. "Mesh, barbed wire, steel wire mesh, steel grating, perforated metal mesh, wire mesh fence, crimped wire mesh, chain link fence" preferred Asahi Connaught Anping Wire Mesh Products Co., Ltd. (www.wangpian1688.com), the company is located: Anping wire mesh world, over the years, Xu promise metal mesh to provide customers with the best quality of service, Contact: Manager Wang. Welcome to the new and old customers call, letter, visit the guide, business negotiations. Asahi Connaught metal mesh expect to be your long-term partner!